Phanteks 500

Phanteks 500 DEFAULT

Phanteks Eclipse P500A High Airflow Full-metal Mesh Design, ATX Mid-tower, Digital-RGB Lighting, 140mm D-RGB Case Fans, Tempered Glass, Dual System Capable, Black

Pros: Thanks to the large mesh front, it has great airflow. My idle/load temps dropped by about 5-10 degrees over my previous case (NZXT H510). It is also quite large, allowing for more room to build, including a dual-system setup or running large radiators/multiple fans. The front can support up to three 120 or three 140 fans, the top can hold up to two 140's and even the rear can hold one of either. The backside includes some nice velcro straps for cable management and rather generous room under the PSU shroud to stuff the extras. It comes with a pretty straight forward manual for case lighting setup and indicating which screws are which, complete with a plastic organizer tray to keep them in. They also include two HDD trays (at 2 HDD each), a vertical GPU bracket and anti-sag bracket.

Cons: The downsides for me would be: I'm not a huge fan of the black sliding covers (x4) that are used to cover some of the cables. They're not horrible, but I would have preferred something like cable grommets or other form of cable routing. Depending on your cable setup, you will never have all of them perfectly aligned, unless you keep some of the unused ones opened, exposing the backside of the side panel. My motherboard only includes 4 pin RGB headers, not 3 pin as the included RGB fans are made. If you do not have a 3 pin header, you would either need an adapter or to use different fans entirely. There is a larger cut out on the top of the PSU shroud that allows for the radiator or full 140 fan setup. However, I currently use 120mm fans up front, leaving a fair amount of space exposing the cables I have tucked underneath. I wish that Phanteks could have included some kind of removalable cover for this section for those who do not take up the full space in their build. Most of these are somewhat nitpicking and not a make or break for this case, at least for me.

Overall Review: I can not comment on the effectiveness of the includes RGB fans, as I actually swapped these out for my Corsair LL fans (prefer the look and easier for lighting control). Overall though, the case is great with plenty of space and features that make it easy to build it and look great afterwards. The airflow and fan/rad support is probably the biggest draw, so if you are looking for something t accommodate that, I think that this is one of the best choices you can make right now.

Sours: https://www.newegg.com/black-phanteks-eclipse-p500a-atx-mid-tower/p/N82E16811854101

Phanteks P500A DRGB Black Mid-Tower

Features:

The Eclipse P500A is a premium mid-tower case that combines high airflow performance with style. It features the 1 mm Ultra-fine Performance mesh front panel for optimal airflow with effective dust filtration. The P500A offers a versatile interior with high-end features such as extensive water-cooling support (up to 420 mm radiators), extensive storage possibilities (can be upgraded up to 10 HDD’s / 13 SSD’s), software-free D-RGB lighting solution, hinged tempered glass side panel, and dual-system support. With a rich feature set and flexible interior, it’s the perfect chassis for people demanding more than the standard mainstream with options for future expansion. The P500A delivers quality and performance with exceptional value and high-end capabilities.

Specifications:

P500ABlack
PH-EC500ATG_DBK
8.86523E+11
Specifications
Dimension240 mm x 510 mm x 505 mm
9.45 in x 20.1 in x 20.0 in
Form FactorMidtower
MaterialsSteel chassis
Motherboard SupportATX, Micro ATX, Mini ITX,
E-ATX *(up to 280mm wide)
Front I/OUSB-C GEN 2
2x USB 3.0
Microphone/Headphone
Power Button
LED Mode Button
LED Color Button

 

The Phanteks Eclipse P500A Airflow D-RGB Tempered Glass Black features a tempered glass side panel, a mesh front panel for optimal airflow, dust filters, supports e-ATX (up to 280mm wide), ATX, m-ATX, and m-ITX motherboards, 3 x pre-installed 140mm D-RGB fans case, radiator support at the front (up to 420mm), top (up to 360mm), and rear (up to 140mm), and supports a graphics card of up to 435mm in length.

 

The Versatile Powerhouse

The Eclipse P500A is a premium mid-tower case that combines high airflow performance with style. It features the Ultra-fine Performance mesh front panel for optimal airflow with dust filtration. Based on the award-winning P600S and Evolv X chassis, the P500A offers a versatile interior with high-end features such as extensive water-cooling support (up to 420mm radiators), extensive storage possibilities (can be upgraded up to 10 HDD’s / 13 SSD’s), software-free D-RGB lighting solution, hinged tempered glass side panel, and dual-system support.

The P500A comes with the same high value known from the Phanteks Eclipse series. With a rich feature set and flexible interior, it’s the perfect chassis for people demanding more than the standard mainstream or wants the option for future expansion.

The P500A delivers quality and performance with exceptional value and high-end capabilities.

 

Features at a glance

– Ultra-Fine Performance Mesh front panel allows high airflow and filters dust out.
– The full mesh panel is engineered from a single piece sheet metal that contributes to a larger intake surface, strong structure and a seamless design.
– High quality Digital-RGB (addressable) integrated lighting with software-free controller.
– Exceptional cooling with pre-installed 3x 140mm D-RGB fans.
– Support for up to 7x 120mm fans or up to 6x 140mm fan.
– Extensive radiator support with up to a 420mm rad in the front and up to a 360mm rad in the top.
– Supports E-ATX Motherboards (up to 280mm wide).
– Modular storage supports up to 10x HDD / SSD mounts (2 included).
– 3x Dedicated Drop-N-Lock SSD brackets.
– Easy and flexible cable management with double loop velcro ties that are easy to tighten / release.
– Clean cable management with sliding cable covers that can be adjusted to match your cables.
– Pre-installed with easy-to-clean high airflow dust filters.
– Anti-sag GPU bracket included that prevents GPU sag.
– 3-Slot Vertical GPU ready. Riser cable is required and sold separately.
– PSU shroud with cut-out and integrated smooth D-RGB lighting.
– Drain port location for convenient waterloop maintenance
– Fast Type-C gen 2 USB port.
– Dual system support if paired with the Phanteks Revolt X power supply.

 

Ultra-Fine Performance Mesh

The P500A Ultra-Fine Performance Mesh front panel allows high airflow while functioning as a dust filter at the same time. This makes it possible to leave out the standard filter to minimize airflow restriction on the front intake. The mesh panel is engineered from a single part to create a strong and seamless design with maximal air intake surface. This makes it one of the best performing mesh panel designs.

 

High Quality D-RGB Lighting

The P500A comes with pre-programmed D-RGB options for the 3x Phanteks SK 140 mm DRGB fans (3-pin case edition) and smooth light strip on the side. These options can be controlled software free with the physical DRGB mode and color buttons on the top panel.

 

The Eclipse P500A lighting comes with smooth gradient transitions in different color modes thanks to the high density D-RGB LED chips.

 

Expandable Storage

Out of the box, the P500A offers a lot of storage possibilities, with 3x dedicated 2.5” SSD brackets and 2x 3.5” Stackable HDD Brackets included.

 

Vertical GPU Ready (3-Slot)

With a 3-slot vertical GPU mount, the P500A provides support for a wide range of high-end GPU’s and extra breathing room for improved thermals.

-Riser cable doesn’t come included and needs to be purchased separately.

 

High-End Cooling

The P500A is designed with high-end cooling in mind. With an Ultra-fine Performance mesh design and support for up to 7x 120 mm / 6x 140 mm fans, the P500A delivers extreme high airflow performance for both air and water cooled systems. It supports up to 420 mm radiators and even provides a drain port location to smoothen out the periodical maintenance of the water loop.

 

Dual System Ready

The P500A can house a secondary Mini-ITX system, in addition to the (E-)ATX main system. The second system is mounted in the top panel using the Dual System ITX bracket and powered by the Phanteks Revolt X power supply, which are available separately. This Dual System configuration is perfect for users who wish to build a Gaming/Streaming, Gaming / Server PC, or a Gaming / Workstation setup.

– Dual System ITX bracket and Phantels Revolt X power supply doesn’t come included and needs to be purchased separately.

Sours: https://sphinxpc.in/shop/cabinets/phanteks-p500a-drgb-black-mid-tower/
  1. David friend wikipedia
  2. Drupal modules filter
  3. Youtube dust collection
  4. 2011 maxima custom
  5. Rugrats go wild clips

Phanteks Eclipse P500A Cabinet (Black)

Model NameEclipse P500A D-RGB BlackModel NoPH-EC500ATG-DBK01Case Dimensions (WxHxD)240 x 510 x 505 mm / 9.45 x 20.1 x 20.0Form FactorMid TowerMaterialsSteel Chassis, Tempered GlassMotherboard SupportE-ATX (Upto 280mm Wide), ATX, micro-ATX, mini-ITXFront IOUSB-C Gen2
2x USB 3.0
Microphone / Headphone
Power Button
LED Mode Button
LED Color ButtonConnectorsPower Switch
power-LED (12V SATA)
HDD-LED
USB 3.0
USB 3.1 Gen2
D-RGB Expansion
D-RGB Third Party
D-RGB MB AdapterSide WindowTempered Glass WindowPCI Slots7 + 3Vertical GPUYes 3-Slots, With Optional Riser CableInternal 3.5" Bay10 (2x Included, Also Supports 2.5" Drives)Internal 2.5" Bay3 (3x Included)Total Fan Mounts7x 120mm / 6x 140mm (3x 140mm D-RGB Included)Front Fan3x 120mm / 3x 140mmTop Fan3x 120mm / 2x 140mmRear Fan1x 120mm / 1x 140mmDust FiltersFront (Integrated) / Top / Bottom PSUFront RadiatorUp to 360 / 420mmTop RadiatorUp to 360 / 280mmRear Radiator120/140 mmFront Radiator Clearance95mm / 3.75 InchesTop Radiator Clearance65mm / 2.56 InchesGPU Length435mm / 17.2 InCPU Cooler Height190mm / 7.5 InMotherboard Width280mm / 11.0 inPSU Length195/250mm (4 HDD Bottom Brackets Used / 2 HDD Brackets Used)Cable ManagementVelcro Strips / Slidable Cable Covers / Zip Tie MountsPackage Dimension325 x 610 x 610mm / 12.8 x 24 x 24 inchesNet Weight8kgGross Weight10kgPackage Contents1x P500A Case
3x 140mm D-RGB Fans (SK 3-Pin Case Edition Fans)
3 x 2.5" SSD Brackets
2 x 3.5" HDD Bracket
1 x Anti-Sag Bracket
1 x Vertical GPU Mount
6 x Zip Ties
1 x Accessory Box With Necessary Screws and StandoffsWarranty5 YearsNote*** Features, Price, Specifications are subject to change without notice.
Sours: https://mdcomputers.in/
Phanteks P500A Airflow Case Review: Thermals, Build Quality vs. TD500, O11 Dynamic, P400A

Eclipse P500A DRGB

Features:

The Eclipse P500A is a premium mid-tower case that combines high airflow performance with style. It features the 1 mm Ultra-fine Performance mesh front panel for optimal airflow with effective dust filtration. The P500A offers a versatile interior with high-end features such as extensive water-cooling support (up to 420 mm radiators), extensive storage possibilities (can be upgraded up to 10 HDD’s / 13 SSD’s), software-free D-RGB lighting solution, hinged tempered glass side panel, and dual-system support. With a rich feature set and flexible interior, it’s the perfect chassis for people demanding more than the standard mainstream with options for future expansion. The P500A delivers quality and performance with exceptional value and high-end capabilities.

Manual

P500ABlackWhite
PH-EC500ATG_DBKPH-EC500ATG_DWT
886523301936886523301943

Specifications

Dimension

240 mm x 510 mm x 505 mm
9.45 in x 20.1 in x 20.0 in

Form Factor

Midtower

Materials

Steel chassis

Motherboard Support

ATX, Micro ATX, Mini ITX,
E-ATX *(up to 280mm wide)

Front I/O

USB-C GEN 2
2x USB 3.0
Microphone/Headphone
Power Button
LED Mode Button
LED Color Button

Sours: https://www.phanteks.com/Eclipse-P500A-DRGB.html

500 phanteks

PHANTEKS ECLIPSE P500A DRGB (E-ATX) MID TOWER CABINET WITH TEMPERED GLASS SIDE PANEL (BLACK) PH-EC500ATG_DBK01

Model NameEclipse P500A D-RGB BlackModel NoPH-EC500ATG_DBK01Case Dimensions (WxHxD)240 x 510 x 505 mm / 9.45 x 20.1 x 20.0Form FactorMid TowerMaterialsSteel Chassis, Tempered GlassMotherboard SupportE-ATX (Upto 280mm Wide), ATX, micro-ATX, mini-ITXFront IOUSB-C Gen22x USB 3.0Microphone / HeadphonePower ButtonLED Mode ButtonLED Color ButtonConnectorsPower Switchpower-LED (12V SATA)HDD-LEDUSB 3.0USB 3.1 Gen2D-RGB ExpansionD-RGB Third PartyD-RGB MB AdapterSide WindowTempered Glass WindowPCI Slots7 + 3Vertical GPUYes 3-Slots, With Optional Riser CableInternal 3.5″ Bay10 (2x Included, Also Supports 2.5″ Drives)Internal 2.5″ Bay3 (3x Included)Total Fan Mounts7x 120mm / 6x 140mm (3x 140mm D-RGB Included)Front Fan3x 120mm / 3x 140mmTop Fan3x 120mm / 2x 140mmRear Fan1x 120mm / 1x 140mmDust FiltersFront (Integrated) / Top / Bottom PSUFront RadiatorUp to 360 / 420mmTop RadiatorUp to 360 / 280mmRear Radiator120/140 mmFront Radiator Clearance95mm / 3.75 InchesTop Radiator Clearance65mm / 2.56 InchesGPU Length435mm / 17.2 InCPU Cooler Height190mm / 7.5 InMotherboard Width280mm / 11.0 inPSU Length195/250mm (4 HDD Bottom Brackets Used / 2 HDD Brackets Used)Cable ManagementVelcro Strips / Slidable Cable Covers / Zip Tie MountsPackage Dimension325 x 610 x 610mm / 12.8 x 24 x 24 inchesNet Weight8kgGross Weight10kgPackage Contents1x P500A Case3x 140mm D-RGB Fans (SK 3-Pin Case Edition Fans)3 x 2.5″ SSD Brackets2 x 3.5″ HDD Bracket1 x Anti-Sag Bracket1 x Vertical GPU Mount6 x Zip Ties1 x Accessory Box With Necessary Screws and Standoffs
Sours: https://www.primeabgb.com/online-price-reviews-india/phanteks-eclipse-p500a-drgb-e-atx-mid-tower-cabinet-tempered-glass-side-panel-black-ph-ec500atg_dbk01/
Phanteks Eclipse P500A - MESH RGB overload!

PHANTEKS ECLIPSE P500A MID TOWER CABINET

Sale!

Eclipse P500A Black (Non-RGB)

  • Ultra-fine Performance Mesh front panel for the best optimal cooling performance; Tempered glass side panel to showcase your build
  • Spacious open interior: supports dual system (with PH-ITXKT_R01), vertical GPU mounting support (with PH-VGPUKT_02), up to 420mm front/280mm top radiator
  • Easy accessibility to I/O featuring USB-C GEN2, 2x USB 3. 0, Microphone/Headphone, Power button
  • Extensive Storage options: Support massive Storage capacity (10x HDD and 3x SSDs)

Out of stock

PHANTEKS

Sale!

From the manufacturer

Related

Weight8.9 kg
Dimensions62 × 32 × 68 cm

SKU: PH-EC500ATG_BKCategories: Mid Tower, PC CabinetTags: Eclipse, FRONT MESH, gaming cabinet, mid tower, P500A Black, Phanteks, Tempered Glass

Related products

Sours: https://compify.in/product/phanteks-eclipse-p500a/

Similar news:

.



648 649 650 651 652